Applications

ConTec SP-307

DESCRIPTION

ConTec SP-307 combines a swipe agent with an effective mix lubricant and hydration aid. It’s unique chemistry creates a low to moderate swipe appearance while its lubrication properties minimize both feed and compaction times. SP-307 is ready to use liquid for use all low slump concrete masonry units. SP-307 improves compaction and density producing higher compressive strength and a less permeable units.

APPLICATION

Use ConTec SP-307 in all types of manufactured concrete where low to moderate swipe is desired. SP-307 is not a water reducer and should not be utilized as such.

PACKAGING

ConTec SP-307 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 490 lbs (222 kg) and 260 gallon (984 L) totes weighing 2390 lbs (1084 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… ….. 1.02- 1.04
Viscosity at 77F, cps …………..… .…. 75—150
Weight per gallon ………………… ….….. 8.6
% Volatile matter (NVM(1)) … ……… 12—17

FEATURES / BENEFITS

● Improves cement particle dispersion and hydration.
● Produces a low to moderate swipe.
● Increases compressive through better compaction and hydration.
● Optimizes material flow which shortens overall machine cycle times.
● Creates more defined edges improving overall appearance.
● Reduces mechanical abrasion in equipment

HANDLING / STORAGE

ConTec SP-307 should be stored at temperatures above 35°F (2°C) Care should be taken to prevent this product from freezing. Should SP-307 freeze, warm till completely liquid then use mechanical agitation to reconstitute.

ADDITION RATES

The recommended dosage is 2-5 fl oz /100 lbs (130-325 mL/100kg) of cement. As with most plasticizers, water content should be monitored to achieve desired appearance. Please consult an ICT representative for further recommendations to determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix SP-307 with other admixtures before application.

ConTec SD-235

DESCRIPTION

ConTec SD-235 is a unique blend of dispersing aids that features cutting-edge polycarboxylate technology. It’s highly active formulation improves both cement and color pigment efficiency in all types of architectural and hardscape concrete units. SD-235 improves cement hydration and provides higher compressive strength in manufactured concrete products. Your ICT technical representative can help you design a mix that will used SD-235 to actually reduce manufacturing cost.

TECHNOLOGY

Cement particles stick together in clumps called agglomerations. This clumping prevents water from reaching all the cement. Use of ConTec SD-235 admix breaks up agglomerations to increase the cement surface area available for hydration. The increased surface area holds more water without slumping your mix.

PACKAGING

ConTec SD-235 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 485 lbs (220 kg) and 260 gallon (984 L) totes weighing 2425 lbs (1100 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…….….. 1.05 – 1.06
Viscosity at 77F, cps …………..…..…. 50—100
Weight per gallon ……………….……….….. 8.8
% Volatile matter (NVM(1)) ………….…..65- 85

FEATURES / BENEFITS

● Improves cement particle dispersion and hydration.
● Aids pigment particle dispersion improving color development.
● Increases compressive and flexural strength.
● Proper use can potentially reduce cement and pigment usage.
● Improves the compaction process enhancing finished density.

HANDLING / STORAGE

ConTec SD-235 should be stored at temperatures above 35°F (2°C) Care should be taken to prevent this product from freezing. Should SD-235 freeze, warm till completely liquid then use mechanical agitation to reconstitute

ADDITION RATES

The recommended dosage is 3 US Fluid Ounces per 100 weight of cement. In dry-cast concrete products SD-235 will increase the demand for water by 5% to 10% above normal addition rates. SD-235 is not a water reducer and should not be utilized as such. Please consult an ICT representative for further recommendations to determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix SD-235 with other admixtures before application.

ConTec SD-231

DESCRIPTION

ConTec SD-231 is a unique blend of dispersing aids that features cutting-edge polycarboxylate technology. It’s highly active formulation improves both cement and color pigment efficiency in all types of architectural and hardscape concrete units. SD-231 improves cement hydration and provides higher compressive strength in manufactured concrete products. Your ICT technical representative can help you design a mix that will used SD-231 to actually reduce manufacturing cost.

TECHNOLOGY

Cement particles stick together in clumps called agglomerations. This clumping prevents water from reaching all the cement. Use of ConTec SD-231 admix breaks up agglomerations to increase the cement surface area available for hydration. The increased surface area holds more water without slumping your mix.

PACKAGING

ConTec SD-231 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 485 lbs (220 kg) and 260 gallon (984 L) totes weighing 2425 lbs (1100 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…….1.05 – 1.06
Viscosity at 77F, cps ………… ..….. 50—100
Weight per gallon ……………….…. ..….….. 8.8
% Volatile matter (NVM(1)) … …..…… ~ 85

FEATURES / BENEFITS

● Improves cement particle dispersion and hydration.
● Aids pigment particle dispersion improving color development.
● Increases compressive and flexural strength.
● Proper use can potentially reduce cement and pigment usage.
● Improves the compaction process enhancing finished density.

HANDLING / STORAGE

ConTec SD-231 should be stored at temperatures above 35°F (2°C) Care should be taken to prevent this product from freezing. Should SD-231 freeze, warm till completely liquid then use mechanical agitation to reconstitute

ADDITION RATES

The recommended dosage is 0.2% by weight of cement. In dry-cast concrete products SD-231 will increase the demand for water by 5% to 10% above normal addition rates. SD-231 is not a water reducer and should not be utilized as such. Please consult an ICT representative for further recommendations to determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix SD-231 with other admixtures before application.

ConTec SD-209

DESCRIPTION

ConTec SD-209 is a unique blend of dispersing aids bringing calcium naphthalene sulfonate technology to a new level. It’s highly active formulation improves both cement and color pigment efficiency in all types of architectural concrete. SD-209 will also improve cement hydration and therefore provide higher compressive strength in manufactured concrete products.

APPLICATION

Use ConTec SD-209 in all types of manufactured concrete where improved cement and pigment dispersion is desired. SD-209 is a low viscosity liquid ready to use as received.

PACKAGING

ConTec SD-209 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 570 lbs (259 kg) and 260 gallon (984 L) totes weighing 2750 lbs (1247 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… ….. 1.2 – 1.22
Viscosity at 77F, cps …………..… .…. 50—100
Weight per gallon ………………… ….….. 10.0
% Volatile matter (NVM(1)) ………… …… ~ 55

FEATURES / BENEFITS

● Improves cement particle dispersion and hydration.
● Aids pigment particle dispersion improving color development.
● Increases compressive and flexural strength.
● Proper use can potentially reduce cement and pigment usage.
● Improves the compaction process enhancing finished density.

HANDLING / STORAGE

ConTec SD-209 should be stored at temperatures above 35°F (2°C) Care should be taken to prevent this product from freezing. Should SD-209 freeze, warm till completely liquid then use mechanical agitation to reconstitute

ADDITION RATES

The recommended dosage is 0.2% by weight of cement. In dry-cast concrete products SD-209 will increase the demand for water by 5 to 10% above normal addition rates. SD-209 is not a water reducer and should not be utilized as such. Please consult an ICT representative for further recommendations to determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix SD-209 with other admixtures before application.

ConTec SD-205

DESCRIPTION

ConTec SD-205 is a unique blend of dispersing aids bringing calcium naphthalene sulfonate technology to a new level. It’s highly active formulation improves both cement and color pigment efficiency in all types of architectural concrete. SD-205 will also improve cement hydration and therefore provide higher compressive strength in manufactured concrete products.

APPLICATION

Use ConTec SD-205 in all types of manufactured concrete where improved cement and pigment dispersion is desired. SD-205 is a low viscosity liquid ready to use as received.

PACKAGING

ConTec SD-205 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 570 lbs (259 kg) and 260 gallon (984 L) totes weighing 2750 lbs (1247 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… ….. 1.19 – 1.21
Viscosity at 77F, cps …………..… .…. 50—100
Weight per gallon ………………… ….….. 10.0
% Volatile matter (NVM(1)) ………… …… ~ 55

FEATURES / BENEFITS

● Improves cement particle dispersion and hydration.
● Aids pigment particle dispersion improving color development.
● Increases compressive and flexural strength.
● Proper use can reduce cement and pigment usage.
● Improves the compaction process enhancing finished density.

HANDLING / STORAGE

ConTec SD-205 should be stored at temperatures above 35°F (2°C) Care should be taken to prevent this product from freezing. Should SD-205 freeze, warm till completely liquid then use mechanical agitation to reconstitute

ADDITION RATES

The recommended dosage is 0.2% by weight of cement. In dry-cast concrete products SD-205 will increase the demand for water by 5 to 10% above normal addition rates. SD-205 is not a water reducer and should not be utilized as such. Please consult an ICT representative for further recommendations to determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix SD-205 with other admixtures before application.

ConTec EC-50

DESCRIPTION

ConTec EC-50 is a integral water repellant admixture used in low slump concrete units such as architectural block, paving stones, SRW units, or masonry mortar. When used properly this unique formulation chemically reacts with concrete to prevent water penetration and control efflorescence. ConTec EC-50 enhances the color and appeal of all types of concrete products. When used in both mortar and masonry units EC-50 reduces water infiltration through masonry walls.

APPLICATION

Use ConTec EC-50 in all types of manufactured concrete in which the reduction of efflorescence and water permeability is desirable.

PACKAGING

ConTec EC-50 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….………..1.01 – 1.02
Viscosity at 77F, cps …………..… ….100—300
Weight per gallon ………………… …….. 8.5
% Volatile matter (NVM(1)) …………… 45-65

FEATURES / BENEFITS

● Increases hydrophobic properties and lowers absorption rates.
● Impedes the formation of primary and secondary efflorescence.
● Helps maintain color integrity throughout.
● Aids color development and can shorten production cycles.
● Improves compressive strength and density.

HANDLING / STORAGE

ConTec EC-50 should be stored at temperatures above 40°F (4.5°C) Care should be taken to prevent this product from freezing. Should EC-50 become frozen the resulting material will be unusable.

ADDITION RATES

The recommended dosage is 8 to 16 fluid ounces per hundred weight of cement for concrete paving stones and concrete roof tile. For SRW units and other architectural block higher dosage rates may be recommended. These dosage rates are estimated, your actual rate should be determined by testing. We recommend the assistance of an ICT technical representative to help you determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix EC-50 with other admixtures before application.

MSDS

ConTec EC-45

DESCRIPTION

ConTec EC-45 is a integral water repellent admixture used in low slump concrete units such as architectural block, paving stones, SRW units, or masonry mortar. When used properly this unique formulation chemically reacts with concrete to prevent water penetration and control efflorescence. ConTec EC-45 enhances the color and appeal of all types of concrete products. When used in both mortar and masonry units EC-45 reduces water infiltration through masonry walls.

APPLICATION

Use ConTec EC-45 in all types of manufactured concrete in which the reduction of efflorescence and water permeability is desirable.

PACKAGING

ConTec EC-45 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….………..1.01 – 1.02
Viscosity at 77F, cps …………..… ….100—300
Weight per gallon ………………… …….. 8.5
% Volatile matter (NVM(1)) …………… 45-65

FEATURES / BENEFITS

● Increases hydrophobic properties and lowers absorption rates.
● Impedes the formation of primary and secondary efflorescence.
● Helps maintain color integrity throughout.
● Aids color development and can shorten production cycles.
● Improves compressive strength and density.

HANDLING / STORAGE

ConTec EC-45 should be stored at temperatures above 40°F (4.5°C) Care should be taken to prevent this product from freezing. Should EC-45 become frozen the resulting material will be unusable.

ADDITION RATES

The recommended dosage is 8 to 16 fluid ounces per hundred weight of cement for concrete paving stones and concrete roof tile. For SRW units and other architectural block higher dosage rates may be recommended. These dosage rates are estimated, your actual rate should be determined by testing. We recommend the assistance of an ICT technical representative to help you determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix EC-45 with other admixtures before application.

MSDS

ConTec WR-650

DESCRIPTION

ConTec WR-650 integral water-repellant is a highly active powder additive designed to reduce permeability and efflorescence in concrete manufactured products. When used properly this unique formulation chemically reacts and bonds utilizing the alkali properties of concrete to provide long lasting performance.

APPLICATION

ConTec WR-650 can be used in a variety of
cementitious dry mix applications where the use of conventional water repellants is not feasible or desired. When used in both mortar and masonry units WR-650 provides permanent protection from water infiltration throughout masonry walls.

PACKAGING

ConTec WR-650 is available in bulk Bags weighing 2204 lbs (1000 kg) or packaged in 22 lb (10 kg) bags stacked 60 bags per pallet. An ICT representative will determine the proper dispensing system to match your operation.

TYPICAL PROPERTIES

Form…….…… ….. ……………………..Powder
Color / Odor………… …..…. White / Slight
Bulk Density …………………. …….400 kg/m3
% Volatile matter (NVM(1)) ………… …… 0.0
VOCs (lbs/gallon) ………………………..None

FEATURES / BENEFITS

● Superior water repellence.
● Improved soil release properties.
● Compatible with other additives.
● Improves durability and freeze/thaw resistance.
● Greatly reduces efflorescence.
● Good alkaline stability.
● High activity lowers addition rates.
● Inhibits water-wicking.

HANDLING / STORAGE

ConTec WR-650 must be stored in a cool, dry, well–ventilated area. When stored properly, WR-650 has a shelf life of 6 to 12 months. Although WR-650 is a low dust formulation always avoid excessive dust formation when handling.

ADDITION RATES

Always consult your ICT technical representative for recommendations for your application.

ConTec EC-60

DESCRIPTION

ConTec EC-60 is a integral efflorescence control admixture used in low slump concrete units such as architectural block, paving stones, SRW units, or masonry mortar. Through careful control of materials and blending technology EC-60 helps you control cost. It is both economical and effective. ConTec EC-60 contains a unique blend of efflorescence control agents and cement and pigment dispersion aids. ConTec EC-60 contains effective efflorescence control and enhances the color and appeal of all types of concrete products.

APPLICATION

Use ConTec EC-60 in all types of manufactured concrete in which the reduction of efflorescence and water permeability is desirable.

PACKAGING

ConTec EC-60 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F……..…………. ….. 1.02
Viscosity at 77F, cps …………..… …..…. < 300
Weight per gallon ………………… …….….. 8.4
% Volatile matter (NVM(1)) … … …… ~ 75-60

FEATURES / BENEFITS

● Adds lubricity to the mix and improves compaction rates.
● Contains multiple cement and pigment dispersants for strength.
● Impedes the formation of primary and secondary efflorescence.
● Reduces cost through careful material and production choices.
● Aids color development and can shorten production cycles.
● Reduces mechanical abrasion in equipment

HANDLING / STORAGE

ConTec EC-60 should be stored at temperatures above 40°F (4.5°C) Care should be taken to prevent this product from freezing. Should EC-60 become frozen the resulting material will be unusable.

ADDITION RATES

We recommend the following range of dosage: 8 to 18 fluid ounces per hundred weight of cement for concrete paving stones and concrete roof tile. For SRW units and other architectural block higher dosage rates may be recommended. These dosage rates are estimated, your actual rate should be determined by testing. We recommend the assistance of an ICT technical representative to help you determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix EC-60 with other admixtures before application.

MSDS

ConTec EC-66

DESCRIPTION

ConTec EC-66 is a integral water repellant admixture used in low slump concrete units such as architectural block, paving stones, SRW units, or masonry mortar. Through careful control of materials and blending technology EC-66 helps you control cost. It is both economical and effective. ConTec EC-66 contains a unique blend of efflorescence control agents and polycarboxylate cement and pigment dispersion aids. ConTec EC-66 contains new and improved primary efflorescence control and enhances the color and appeal of all types of concrete products.

APPLICATION

Use ConTec EC-66 in all types of manufactured concrete in which the reduction of efflorescence and water permeability is desirable.

PACKAGING

ConTec EC-66 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F……..…………. …~1.019
Viscosity at 77F, cps …………..… …..…. < 300
Weight per gallon ………………….… 8.47-8.50
% Volatile matter (NVM(1)) ………… …… ~ 60

FEATURES / BENEFITS

● Increases hydrophobic properties and lowers absorption rates.
● Contains polycarboxylate dispersants for strength.
● Impedes the formation of primary and secondary efflorescence.
● Reduces cost through careful material and production choices.
● Aids color development and can shorten production cycles.
● Reduces mechanical abrasion in equipment

HANDLING / STORAGE

ConTec EC-66 should be stored at temperatures above 40°F (4.5°C) Care should be taken to prevent this product from freezing. Should EC-66 become frozen the resulting material will be unusable.

ADDITION RATES

We recommend the following range of dosage: 10 to 18 fluid ounces per hundred weight of cement for concrete paving stones and concrete roof tile. For SRW units and other architectural block higher dosage rates may be recommended. These dosage rates are estimated, your actual rate should be determined by testing. We recommend the assistance of an ICT technical representative to help you determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix EC-66 with other admixtures before application.

MSDS

ConTec EC-166

DESCRIPTION

ConTec EC-166 is a integral water repellant admixture used in low slump concrete units such as architectural block, paving stones, SRW units, or masonry mortar. ConTec EC-166 contains a unique blend of efflorescence control agents and polycarboxylate cement and pigment dispersion aids. ConTec EC-166 contains new and improved primary efflorescence control and enhances the color and appeal of all types of concrete products. When used in both mortar and masonry units EC-166 reduces water infiltration through masonry walls.

APPLICATION

Use ConTec EC-166 in all types of manufactured concrete in which the reduction of efflorescence and water permeability is desirable.

PACKAGING

ConTec EC-166 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F……..…….. 1.02
Viscosity at 77F, cps …………….  < 300
Weight per gallon ……… …….….. 8.4
% Volatile matter (NVM(1)) …… ~ 60

FEATURES / BENEFITS

●   Increases hydrophobic properties and lowers absorption rates.
●  Contains high levels of polycarboxylate dispersants for strength.
●   Impedes the formation of primary and secondary efflorescence.
●   Increases product freeze-thaw durability with its unique densifying properties.
●   Aids color development and can shorten production cycles.
●   Reduces mechanical abrasion in equipment

HANDLING / STORAGE 

ConTec EC-166 should be stored at temperatures above 40°F (4.5°C)  Care should be taken to prevent this product from freezing. Should EC-166 become frozen the resulting material will be unusable.

ADDITION RATES

We recommend the following range of dosage: 8 to 16 fluid ounces per hundred weight of cement for concrete paving stones and concrete roof tile. For SRW units and other architectural block higher dosage rates may be recommended. These dosage rates are estimated, your actual rate should be determined by testing. We recommend the assistance of an ICT technical representative to help you determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix EC-166 with other admixtures before application.

MSDS

ConTec EC-135

DESCRIPTION

ConTec EC-135 is a integral water repellant admixture used in low slump concrete units such as architectural block, paving stones, SRW units, or masonry mortar. When used properly this unique formulation chemically reacts with concrete to prevent water penetration and control efflorescence. ConTec EC-135 contains new and improved primary efflorescence control and enhances the color and appeal of all types of concrete products. When used in both mortar and masonry units EC-135 reduces water infiltration through masonry walls.

APPLICATION

Use ConTec EC-135 in all types of manufactured concrete in which the reduction of efflorescence and water permeability is desirable.

PACKAGING

ConTec EC-135 is available in bulk quantities or packaged in 50 gallon (189 L) drums weighing 440 lbs (200 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….… ….. 1.008
Viscosity at 77F, cps …………..….  < 200
Weight per gallon …………… …….….. 8.4
% Volatile matter (NVM(1))… …… ~ 60

FEATURES / BENEFITS

●   Increases hydrophobic properties and  lowers absorption rates.
●   Impedes the formation of primary and secondary efflorescence.
●   Increases product durability with its unique densifying properties.
●   Aids color development and can shorten production cycles.
●   Reduces mechanical abrasion in equipment

HANDLING / STORAGE

ConTec EC-135 should be stored at temperatures above 40°F (4.5°C)  Care should be taken to prevent this product from freezing. Should EC-135 become frozen the resulting material will be unusable.

ADDITION RATES

We recommend the following range of dosage: 8 to 16 fluid ounces per hundred weight of cement for concrete paving stones and concrete roof tile. For SRW units and other architectural block higher dosage rates may be recommended. These dosage rates are estimated, your actual rate should be determined by testing. We recommend the assistance of an ICT technical representative to help you determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix EC-135 with other admixtures before application.

MSDS

ConTec SR-550

DESCRIPTION

ConTec SR-550 is a ready-to-use liquid admixture used to retard setting times by controlling the hydration of cement in the manufacture of concrete products. SR-550 is compatible with a wide range of concrete admixtures , but should always be dispensed separately. SR-550 improves the properties of precast concrete when used in conjunction with air entrainment, such as AE-80 or AE-407.

APPLICATION

ConTec SR-550 may be used wherever the need to retard the initial and final set times of concrete is applicable. SR-550 meets ASTM C 494/c 494M standards for Type B retardation and Type D water reducing admixtures. SR-550 improves uniformity and predictability in high performance concrete.

PACKAGING

ConTec SR-550 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 495 lbs (224 kg) and 265 gallon (1003 L) totes weighing 2385 lbs (1082 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… ….. 1.21 – 1.24
Viscosity at 77F, cps ………… …..…. 100 max
Weight per gallon …………………. ….10.1 – 10.3
% Volatile matter (NVM(1)) ………… …… ~ 80
Appearance …………….. Dark Amber Liquid

FEATURES / BENEFITS

● Improves workability and plasticity.
● Retards setting times in cementitious products
● Increases compressive strengths and reduces permeability.
● Affords a water reduction of 5% or better.
● Reduces segregation.

HANDLING / STORAGE

ConTec SR-550 can be stored over a wide range of temperatures but should not be allowed to freeze. Should SR-550 freeze, allow complete thawing before mixing by mechanical means. SR-550 has a minimum shelf like of 12 months. With proper storage conditions the shelf life can be greatly extended.

ADDITION RATES

The addition rates for SR-550 will vary depending on the variations in job conditions and the concrete components being utilized. Typical dosage will range from 2 to 8 fl oz per 100 lbs of cement. Never mix other admixtures wit SR-550 before addition to mixer. Consult your ICT representative for assistance to determine the proper dosage for your application.

ConTec RA-580

DESCRIPTION
ConTec RA-580 mold release agent is made from safe, low-voc, oils. It eliminates release agent related stains and discoloration. RA-580 produces clean releases and reduces bug-holes on vertical and horizontal mold surfaces.

APPLICATION
Cover entire cleaned mold surface with RA-580 as received. A Low-pressure air-less sprayer or a HVLP sprayer works well. Do not apply excess or allow excess to pool on mold surface as it will disfigure the concrete surface. RA-580 is compatible with most mold materials. Always test one mold for compatibility before using RA-580 in production.

PACKAGING
ConTec RA-580 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2360 lbs (1070 kg).

TYPICAL PROPERTIES
Specific Gravity at 77F…….…… ….. 0.859 – 0.861
Viscosity at 77F, cps ………… …..…. 100 max
Weight per gallon …………………. ….7.16 – 7.18
% Volatile matter (NVM(1)) ………… …… ~ 90

FEATURES / BENEFITS
● Easy Release.
● Non-staining.
● Reduces bug-holes.
● Reduces build up.
● Excellent price/performance ratio.
● Tolerates heat accelerated drying.

HANDLING / STORAGE
ConTec RA-580 can be stored over a wide range of temperatures. Provide adequate ventilation with use. If sprayed do not breath mist.

APPLICATION RATES
1/3—2/3 fl oz / sq yard (10—20 ml / square meter). Always consult your ICT technical representative for recommendations for your application.

MSDS

ConTec RA-570

DESCRIPTION
ConTec RA-570 concentrated mold release agent is made from biodegradable oils. It eliminates release agent related stains and discoloration. RA-570 produces clean releases and reduces bug-holes on vertical and horizontal mold surfaces.

APPLICATION
Dilute RA-570 with potable water at a rate from 1 parts to 4 parts water with 1 part RA-570. Stir well. Cover entire cleaned mold surface with RA-570 as received. A Low-pressure air-less sprayer or a HVLP sprayer works well. Do not apply excess or allow excess to pool on mold surface as it will disfigure the concrete surface. RA-570 is compatible with most mold materials. Always test one mold before using RA-570 in production.

PACKAGING
ConTec RA-570 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2360 lbs (1070 kg).

TYPICAL PROPERTIES
Specific Gravity at 77F…….…… …………. 0.95
Viscosity at 77F, cps ………… …..…. 500 max
Weight per gallon …………….…. ….7.91 – 7.94
% Volatile matter (NVM(1)) ……… …… ~ 30-90

FEATURES / BENEFITS
● Easy Release.
● Dilute with up to 4 parts water.
● Non-staining.
● Reduces bug-holes.
● Reduces build up.
● Excellent price/performance ratio.
● Easily bio-degradable.
● Tolerates heat accelerated drying.
● Concentrate saves shipping cost.

HANDLING / STORAGE
ConTec RA-570 can be stored over a wide range of temperatures but should not be allowed to freeze. Should ConTec RA-570 freeze, it will not thaw to a usable product. Provide adequate ventilation with use. Store as concentrate, do not dilute until you are ready to use.

APPLICATION RATES
1/3—2/3 fl oz / sq yard (10—20 ml / square meter). Always consult your ICT technical representative for recommendations for your application.

MSDS

ConTec RA-550

DESCRIPTION

ConTec RA-550 mold release agent is made from safe, low-voc, renewable bio-oils.  Concrete roof tile molds are an ideal application for RA-550.  It  eliminates release agent related stains and discoloration.  RA-550 produces clean releases and reduces bug-holes on vertical and horizontal mold surfaces.

APPLICATION

Cover  entire  cleaned mold surface with RA-550 as received.  A Low-pressure air-less sprayer  or a HVLP sprayer  works well.   Do not apply excess or allow excess to pool on mold surface as it will disfigure the concrete surface.  RA-550 is compatible with most mold materials.  Always test one mold for compatibility before using RA-550 in production.

PACKAGING

ConTec RA-550 is available in bulk quantities or packaged in 250 gallon (946 L) totes weighing 1975 lbs (896 kg) gross.

TYPICAL PROPERTIES

Specific Gravity at 77F………..…… ….. 0.88 – 0.882
Viscosity at 77F, cps …………   …..….  100 max
Weight per gallon ……………..…….  ….7.32 – 7.37
% Volatile matter (NVM(1)) ……… …… ~ 0

FEATURES / BENEFITS

  • Easy Release.
  • Non-staining.
  • Reduces bug-holes.
  • Reduces build up.
  • Excellent price/performance ratio.
  • Tolerates heat accelerated drying.
  • Non-toxic
  • Renewable bio sourced
  • Bio-degradable

HANDLING / STORAGE

ConTec RA-550 can be stored over a wide range of temperatures.  Provide adequate ventilation with use. If sprayed do not breath  mist.

APPLICATION RATES

1/3—2/3 fl oz / sq yard (10—20 ml / square meter).   Always consult your ICT technical representative for recommendations for your application.

MSDS

Post Navigation