Sealers

Sealers

Sealed Concrete Sample

Sealed Concrete Sample

 

ICT offers acrylic polymer and silane/siloxane sealers.   Both these water-based sealers offer effective protection for your concrete surfaces and masonry units.

Use our acrylic based sealers increased gloss is desirable.  By varying the application rate of our acrylic sealers you can adjust the gloss from very slight to semi-gloss.

We suggest avoiding heavy application rates in areas with foot or vehicular traffic.  Over application results in a finish may be high-gloss but it will not be durable.

It is best to use thinner applications allow the sealer to soak in without puddling on the surface.  The protection is locked into the concrete, not laying exposed on the surface of the concrete.

For more information call 908-453-2737 and ask for technical information or email info@bestadmix.com.

Acrylics:

CS-630 Acrylic Sealer Technical Data Sheet

CS-620 Acrylic Sealer Technical Data Sheet

CS-620C Acrylic Sealer Technical Data Sheet

CS-605 Acrylic Sealer Technical Data Sheet

Our silane/siloxane blends penetrate concrete deeply and chemically bond for effective, long-lasting protection.  When properly applied they provide nearly invisible protection.  It is easy to apply and available in concentrations that are custom blended for your application.  This family of sealers is so powerful that it is specified by New York Department of Transportation for concrete bridge deck overlay protection from de-icing chemicals and other environmental attack.

CS-640 Siliane/Siloxane Sealer Technical Data Sheet

 

Below are some of the ICT products that are applicable to sealers.  Please contact ICT technical support at 908-453-2737 to discuss your production issues.  Our goal is to understand your unique production issues and customize a solution package.

 

Applicable products:

 

ConTec CS-640

DESCRIPTION

ConTec CS-640 sealer is an water-based emulsion of organomodified siloxanes/silanes. It is designed to give concrete tough, water-resistant properties. It excels on concrete roof tile and concrete pavements. ConTec CS-640 is proven effective on porous concrete masonry surfaces. Properly applied CS-640 aids in the prevention of moss and algae growth.

APPLICATION

Spray systems should be airless type. There is no need to over apply. Only one coat is required. Apply only when substrate and ambient temperatures are above 64 degrees F. High volume users may consider buying CS-640 concentrate. Consult your ICT representative about our automated inline mixing units.

PACKAGING

ConTec CS-640 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2360 lbs (1070 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… ….. 1.00 – 1.02
Viscosity at 77F, cps ………… …..…. 100 max
Weight per gallon …………………. ….8.35 – 8.4
% Volatile matter (NVM(1)) ………… …… ~ 50

FEATURES / BENEFITS

● Deep penetrating.
● Good water repellency.
● Fast Drying – Reduces Blocking.
● Improves durability and chemical resistance.
● Reduces efflorescence on concrete products.
● Self cleaning effect.
● Excellent price/performance ratio.
● Can be applied on dry or green concrete.
● Tolerates heat accelerated drying.

HANDLING / STORAGE

ConTec CS-640 can be stored over a wide range of temperatures but should not be allowed to freeze. Should ConTec CS-640 freeze, it will not thaw to a usable product. Provide adequate ventilation with use.

APPLICATION RATES

Application rates can vary, depending on surface, from 100 to 500 square feet per gallon. Typical roof tile application rates average 9 grams per square foot. Optimum coverage rates vary with geographic area and the texture and composition of the surface being sealed. Always consult your ICT technical representative for recommendations for your application.

Call and ask for technical assistance at 908-453-2737 or email info@bestadmix.com.

PDF File

MSDS

ConTec CS-630

DESCRIPTION

ConTec CS-630 sealer is an aqueous fine particle acrylic co-polymer dispersion blend. It is designed to give concrete tough, water-resistant properties. It excels on concrete roof tile. ConTec CS-630 is proven effective on porous concrete masonry surfaces. Properly applied CS-630 aids in the prevention of moss and algae growth.

APPLICATION

Spray systems should be airless type. There is no need to over apply. Only one coat is required. Apply only when substrate and ambient temperatures are above 64 degrees F. High volume users may consider buying CS-630 concentrate. Consult your ICT representative about our automated inline mixing units.

PACKAGING

ConTec CS-630 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2360 lbs (1070 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… ….. 1.00 – 1.02
Viscosity at 77F, cps ………… …..…. < 300
Weight per gallon ……………..…. ….8.65 – 8.7
% Volatile matter (NVM(1)) ………… …… ~ 50

FEATURES / BENEFITS

● Deep penetrating.
● Good water repellency.
● Fast Drying – Reduces Blocking.
● Improves durability and chemical Resistance.
● Reduces efflorescence on concrete products.
● Self cleaning effect.
● Excellent price/performance ratio.
● Extremely blush resistant

HANDLING / STORAGE

ConTec CS-630 can be stored over a wide range of temperatures but should not be allowed to freeze. Should ConTec CS-630 freeze, it will not thaw to a usable product. Provide adequate ventilation with use.

APPLICATION RATES

Application rates can vary, depending on surface, from 100 to 500 square feet per gallon. Typical roof tile application rates average 9—12 grams per square foot. Optimum coverage rates vary with geographic area and the texture and composition of the surface being sealed. Always consult your ICT technical representative for recommendations for your application.

MSDS

ConTec CS-620

DESCRIPTION

ConTec CS-620 sealer is an aqueous fine particle dispersion of acrylic polymer. It is designed to give all concrete masonry units tough, water-resistant properties. ConTec CS-620 is proven effective on porous concrete masonry surfaces. It can be applied in the field or on the dry side of the production line. ConTec CS-620 can be tinted using approved pigments.

APPLICATION

Spray systems should be airless type. There is no need to over apply. Only one coat is required. Apply only when substrate and ambient temperatures are above 64 degrees F. Maintain temp for 3 hours or until completely dry.

PACKAGING

ConTec CS-620 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… .….. 1.00 – 1.03
Viscosity at 77F, cps ………… …. …..…. < 400
Weight per gallon ………………… ….8.7 – 8.75
% Volatile matter (NVM(1)) ………… …… ~ 50
VOCs (lbs/gallon) ….……0.0 lb/gal or 0.0 lb/ton

FEATURES / BENEFITS

● Deep penetrating.
● Non yellowing.
● Fast Drying – Reduces Blocking.
● Improves durability and chemical resistance.
● Reduces efflorescence on concrete products.
● Extremely blush resistant.

HANDLING / STORAGE

ConTec CS-620 can be stored over a wide range of temperatures but should not be allowed to freeze. Should ConTec CS-620 freeze, it will not thaw to a usable product. Provide adequate ventilation with use.

ADDITION RATES
Application rates can vary, depending on surface, from 100 to 420 square feet per gallon. Optimum coverage rates vary per application and geographic area. Always consult your ICT technical representative for recommendations for your application.

MSDS CS620-15

Call and ask for technical assistance at 908-453-2737 or email info@bestadmix.com.

PDF File

ConTec CS-620C

DESCRIPTION

ConTec CS-620C sealer is an concentrated aqueous fine particle dispersion of acrylic polymer. It is designed to give all concrete masonry units tough, water-resistant properties. ConTec CS-620C is proven effective on porous concrete masonry surfaces. It can be applied in the field or on the dry side of the production line. ConTec CS-620C can be tinted using approved pigments.

APPLICATION

Dilute before using. Stir well. Spray systems should be airless type. There is no need to over apply. Only one coat is required. Apply only when substrate and ambient temperatures are above 64 degrees F. Maintain temp for 3 hours or until completely dry.

PACKAGING

ConTec CS-620C is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… ….. 1.00 – 1.02
Viscosity at 77F, cps ………… …..…. 100 max
Weight per gallon ……………………. ….8.4 – 8.5
% Volatile matter (NVM(1)) ….………… …… ~ 55
VOCs (lbs/gallon) ……..012 lb/gal or 2.9 lb/ton

FEATURES / BENEFITS

● Deep penetrating.
● Concentrate saves freight.
● Non yellowing.
● Fast Drying – Reduces Blocking.
● Improves durability and chemical resistance.
● Reduces efflorescence on concrete products.
● Extremely blush resistant.

HANDLING / STORAGE

ConTec CS-620C can be stored over a wide range of temperatures but should not be allowed to freeze. Should ConTec CS-620C freeze, it will not thaw to a usable product. Provide adequate ventilation with use. Store as concentrate in original sealer container until just before usage.

ADDITION RATES

Dilute to appropriate solids level before using. 20% final solids is common but solids from 10% to 33% can be used. Add potable water and mix well.

Application rates can vary, depending on surface, from 100 to 420 square feet per gallon. Optimum coverage rates vary with geographic area. Always consult your ICT technical representative for recommendations for your application.

MSDS

Call and ask for technical assistance at 908-453-2737 or email info@bestadmix.com.

PDF File

ConTec CS-605

DESCRIPTION

ConTec CS-605 sealer is an aqueous fine particle dispersion of acrylic polymer. It is designed to give all concrete masonry units tough, water-resistant properties. ConTec CS-605 is proven effective on porous concrete masonry surfaces. It can be applied in the field or on the dry side of the production line. ConTec CS-605 can be tinted using approved pigments.

APPLICATION

Spray systems should be airless type. There is no need to over apply. Only one coat is required. Apply only when substrate and ambient temperatures are above 64 degrees F. Maintain temp for 3 hours or until completely dry.

PACKAGING

ConTec CS-605 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2400 lbs (1089 kg).

TYPICAL PROPERTIES

Specific Gravity at 77F…….…… ….. 1.00 – 1.02
Viscosity at 77F, cps ………… …..…. 100 max
Weight per gallon …………………. ….8.4 – 8.5
% Volatile matter (NVM(1)) ………… …… ~ 80
VOCs (lbs/gallon) ……..012 lb/gal or 2.9 lb/ton

FEATURES / BENEFITS

● Deep penetrating.
● Non yellowing.
● Fast Drying – Reduces Blocking.
● Improves durability and chemical resistance.
● Reduces efflorescence on concrete products.
● Extremely blush resistant.

HANDLING / STORAGE

ConTec CS-605 can be stored over a wide range of temperatures but should not be allowed to freeze. Should ConTec CS-605 freeze, it will not thaw to a usable product. Provide adequate ventilation with use.

ADDITION RATES

Application rates can vary, depending on surface, from 100 to 420 square feet per gallon. Optimum coverage rates vary with geographic area. Always consult your ICT technical representative for recommendations for your application.

MSDS

Call and ask for technical assistance at 908-453-2737 or email info@bestadmix.com.