ConTec SD-209


ConTec SD-209 is a unique blend of dispersing aids bringing calcium naphthalene sulfonate technology to a new level. It’s highly active formulation improves both cement and color pigment efficiency in all types of architectural concrete. SD-209 will also improve cement hydration and therefore provide higher compressive strength in manufactured concrete products.


Use ConTec SD-209 in all types of manufactured concrete where improved cement and pigment dispersion is desired. SD-209 is a low viscosity liquid ready to use as received.


ConTec SD-209 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 570 lbs (259 kg) and 260 gallon (984 L) totes weighing 2750 lbs (1247 kg).


Specific Gravity at 77F…….…… ….. 1.2 – 1.22
Viscosity at 77F, cps …………..… .…. 50—100
Weight per gallon ………………… ….….. 10.0
% Volatile matter (NVM(1)) ………… …… ~ 55


● Improves cement particle dispersion and hydration.
● Aids pigment particle dispersion improving color development.
● Increases compressive and flexural strength.
● Proper use can potentially reduce cement and pigment usage.
● Improves the compaction process enhancing finished density.


ConTec SD-209 should be stored at temperatures above 35°F (2°C) Care should be taken to prevent this product from freezing. Should SD-209 freeze, warm till completely liquid then use mechanical agitation to reconstitute


The recommended dosage is 0.2% by weight of cement. In dry-cast concrete products SD-209 will increase the demand for water by 5 to 10% above normal addition rates. SD-209 is not a water reducer and should not be utilized as such. Please consult an ICT representative for further recommendations to determine the proper dosage rate and order of addition for your particular process. Order of addition procedures can vary per facility. Never mix SD-209 with other admixtures before application.