ConTec CS-630


ConTec CS-630 sealer is an aqueous fine particle acrylic co-polymer dispersion blend. It is designed to give concrete tough, water-resistant properties. It excels on concrete roof tile. ConTec CS-630 is proven effective on porous concrete masonry surfaces. Properly applied CS-630 aids in the prevention of moss and algae growth.


Spray systems should be airless type. There is no need to over apply. Only one coat is required. Apply only when substrate and ambient temperatures are above 64 degrees F. High volume users may consider buying CS-630 concentrate. Consult your ICT representative about our automated inline mixing units.


ConTec CS-630 is available in bulk quantities or packaged in 55 gallon (208 L) drums weighing 480 lbs (218 kg) and 265 gallon (1003 L) totes weighing 2360 lbs (1070 kg).


Specific Gravity at 77F…….…… ….. 1.00 – 1.02
Viscosity at 77F, cps ………… …..…. < 300
Weight per gallon ……………..…. ….8.65 – 8.7
% Volatile matter (NVM(1)) ………… …… ~ 50


● Deep penetrating.
● Good water repellency.
● Fast Drying – Reduces Blocking.
● Improves durability and chemical Resistance.
● Reduces efflorescence on concrete products.
● Self cleaning effect.
● Excellent price/performance ratio.
● Extremely blush resistant


ConTec CS-630 can be stored over a wide range of temperatures but should not be allowed to freeze. Should ConTec CS-630 freeze, it will not thaw to a usable product. Provide adequate ventilation with use.


Application rates can vary, depending on surface, from 100 to 500 square feet per gallon. Typical roof tile application rates average 9—12 grams per square foot. Optimum coverage rates vary with geographic area and the texture and composition of the surface being sealed. Always consult your ICT technical representative for recommendations for your application.


Comments are closed.

Post Navigation