Release Agent

ConTec RA-570 concentrated mold release agent is made from safe, bio-degradable oils. It eliminates release agent related stains and discoloration. RA-570 produces clean releases and reduces bug-holes on vertical and horizontal mold surfaces.

Features & Benefits

  • Easy Release
  • Non-staining
  • Reduces bug-holes
  • Reduces build up
  • Excellent price/ performance ratio
  • Tolerates heat accelerated drying
  • Bio-degradable


ConTec RA-570 is best compatible with vertical and horizontal molds. ConTec RA-570 should be diluted with potable water at a rate from 1 parts to 4 parts water with 1 part RA-570. Stir well. Cover entire cleaned mold surfaces with RA-570 as received. A Low-pressure air-less sprayer or a HVLP sprayer works well. Do not apply excess or allow excess to pool on mold surface as it will disfigure the concrete surface. RA-570 is compatible with most mold materials. Always test one mold before using RA-570 in production.

ConTec RA-570



ConTec RA-570 is available in bulk quantities or packaged in 55 gallon (209 L) drums weighing 480 lb (218 kg) and 265 gallon (1003 L) totes weighing 2,360 lb (1070 kg).


ConTec RA-570 can be stored over a wide range of temperatures but should not be allowed to freeze. Should ConTec RA-570 freeze, it will not thaw to a usable product. Provide adequate ventilation with use. Store as concentrate, do not dilute until you are ready to use.


1/3 -2/3 fL oz/ sq yard (10-20 ml/square meter). Always contact your ICT technical representative fro recommendations for your application.


Specific Gravity at 77°F: 0.95
Viscosity at 77°F cps: 500 max
Weight per gallon: 7.91 – 7.94 lb
% Volatile matter (NVM(1)): ~30 – 90