Dry Cast Plasticizer
ConTec SP-306 combines a swipe agent with an effective mix lubricant and hydration aid. Its unique chemistry creates a low to moderate swipe appearance while its lubrication properties minimize both feed and compaction times. SP-306 is ready-to-use liquid for use in most low slump concrete masonry units. It improves compaction and density producing higher compressive strength and less permeable units.
Features & Benefits
- Improves cement particle dispersion & hydration
- Produces a low to moderate swipe
- Increases compressive strength
- Optimizes material flow to shorten machine cycle times
- Creates more defined edges improving overall appearance
- Reduces mechanical abrasion in equipment
Applications
ConTec SP-306 can be used in all types of manufactured concrete where low to moderate swipe is desired. SP-306 is not a water reducer.
ConTec SP-306
TECHNICAL INFORMATION
ConTec SP-306 is available in bulk quantities or packaged in 55-gallon drims and 260 gallon totes. An ICT representative will work with you to determine the proper dispensing system to match your operation.
ConTec SP-306 must be stored at temperatures above 35 degrees, Care should be taken to prevent the product from freezing. Should SP-306 freeze, warm until completely liquid then use mechanical agitation to reconstitute.
The typical dosage range for ConTec SP-306 is 2-5 fl oz/100 lb (1330-325 mL/100 kg) of cement. As with most plasticizers, water content should be monitored to achieve desired appearance. Consult your ICT technical representative for recommendations and guidelines for your application.
Specific Gravity @77 deg F: 1.02 – 1.04
Viscosity @77 deg F, cps: 75 – 150
Weight per gal: 8.6 lb
% Volatile matter (NVM(1)): 12 – 17
